Schneider Electric, VarPlus Can HDuty Capacitor - 5/6 kvar - 400 V - 50/60Hz
Special Price EGP 3,307 Regular Price EGP 4,409
Schneider Electric, VarPlus Can HDuty Capacitor - 5/6 kvar - 400 V - 50/60Hz is available to buy in increments of 1
Quick Overview
Range of Product: PowerLogic
Product or Component Type: Heavy Duty Capacitor
Network Frequency: 50/60 Hz
Network Harmonic Content: ≤ 20%
Related Products
Check items to add to the cart or
VarPlus Can capacitor are a reliable and flexible solution for power factor correction in stringent operating conditions. These capacitors are particularly used for higher voltage disturbances or when a few non-linear loads are present. The rated current of the capacitors must be in increased in order to cope with the circulation of the harmonic current. This capacitor provides a rated output power of 4.5 kVar at 380V AC, 50 Hz. Fastening assured by a double Faston terminal. This component meet the standards IEC 60831-1 and IEC 60831-2. The case product weight is 0.9 kg.
| Specifications | |
Main | |
| Range of product | PowerLogic |
| Product or component type | Heavy duty capacitor |
| Network frequency | 50/60 Hz |
| Series name | HDuty |
| Network harmonic content | <= 20 % |
| Electrical parameters | 4.5 kvar 380 V 50 Hz |
| 5.4 kvar 380 V 60 Hz | |
| 5 kvar 400 V 50 Hz | |
| 6 kvar 400 V 60 Hz | |
| 5.4 kvar 415 V 50 Hz | |
| 6.5 kvar 415 V 60 Hz | |
| Maximum permissible voltage | 1.1 x Un (8 hours over 24 hours) |
| continuous overcurrent capacity | 1.8 x In |
| Rated voltage | 380…415 V AC 50/60 Hz |
| Complementary | |
| dielectric losses | < 0.2 W/kvar |
| Power losses | < 0.5 W/kVAr |
| capacitance tolerance | - 5 % to 10 % |
| Voltage test | 2.15 x Un AC between terminals for 10 s |
| <= 660 V - 3 kV AC between terminal and container for 10 s | |
| >= 660 V - 6 kV AC between terminal and container for 10 s | |
| inrush current | 250 x In |
| Maximum switching operation per year | ٧٠٠٠ |
| Service life in hours | 130000 h |
| Dielectric material | Metallized polypropylene film with Zn/Al alloy, special resistivity & profile, special edge (wave cut) |
| Impregnation material | Non-PCB dry PUR resin |
| Biodegradable | |
| Type of installation | Indoor installation |
| Connections - terminals | Double Faston terminal |
| Mounting mode | Upright/horizontal |
| Diameter | 63 mm |
| height | 245 mm |
| Net weight | 0.9 kg |
| Environment | |
| standards | IEC 60831-1 |
| IEC 60831-2 | |
| IP degree of protection | IP20 |
| Operating altitude | 2000 m |
| Temperature class | D |
| Ambient air temperature for operation | -25…55 °C |
| Brand | Schneider Electric |
|---|---|
| Height [cm] | 24.5 |
| Diameter [cm] | 6.3 |
Write Your Own Review
