Time-Delay Auxiliary Contact Block, TeSys D, 1NO + 1NC, On-Delay 1-30s, Front Mounting, Screw Terminals, Schneider Electric
Range of product: TeSys Deca
Product type: Time delay auxiliary contact block
Contacts operation: Time delay
Pole contact composition: 1 NO + 1 NC
The LADS2 Time-Delay Auxiliary Contact Block, a component of Schneider Electric's TeSys D product line, is a valuable addition to your electrical control system. This contact block is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) contact, featuring an adjustable on-delay time range of 1 to 30 seconds. Its front-mounting design and screw terminals make installation and wiring simple and efficient, ensuring precise control in your applications.
Key Features:
Dual Contacts: The LADS2 provides both 1 Normally Open (NO) and 1 Normally Closed (NC) contacts, offering flexibility in your control circuit design.
Adjustable On-Delay: With an adjustable on-delay time range of 1 to 30 seconds, you can fine-tune the timing for your specific application needs.
Front Mounting: The front-mounting design facilitates easy installation and maintenance, allowing for quick access and adjustments.
Screw Terminals: Screw terminals simplify the wiring process, ensuring a secure and reliable connection.
Technical Specifications:
Contact Configuration: 1NO (Normally Open) + 1NC (Normally Closed)
Delay Time Range: On-Delay, 1-30 seconds
Mounting: Front Mounting
Terminals: Screw Terminals
Specifications | |
Main | |
Range | TeSys |
TeSys Deca | |
Product name | TeSys Deca |
Product or component type | Time delay auxiliary contact block |
Range compatibility | TeSys Deca CAD |
TeSys Deca LC1D | |
TeSys F LC1F | |
TeSys F CR1F | |
Device application | Star delta starter |
Mounting location | Front |
Pole contact composition | 1 NO + 1 NC |
Contacts operation | Time delay |
Timer type | On delay |
Time delay range | 1...30 s |
[Ue] rated operational voltage | 690 V AC 25...400 Hz |
[Ie] rated operational current | 6 A at 120 V AC-15 |
1.04 A at 690 V AC-15 | |
0.55 A at 125 V DC-13 | |
0.1 A at 600 V DC-13 | |
[Ui] rated insulation voltage | 690 V conforming to IEC 60947-5-1 |
600 V conforming to UL 60947-5-1 | |
600 V conforming to CSA C22.2 No 60947-5-1 | |
[Ith] conventional free air thermal current | 10 A (at 60 °C) |
standards | CSA C22.2 No 60947-5-1 |
GB/T 14048.5 | |
EN/IEC 60947-5-1 | |
product certifications | IECEE CB Scheme |
UL | |
CSA | |
CCC | |
EAC | |
UKCA | |
Complementary | |
Irms rated making capacity | 140 A at <= 690 V AC conforming to IEC 60947-5-1 |
250 A at <= 690 V DC conforming to IEC 60947-5-1 | |
Permissible short-time rating | 100 A 60 °C 1 s |
120 A 60 °C 500 ms | |
140 A 60 °C 100 ms | |
Protection type | GG fuse 10 A |
Mechanical durability | 5 Mcycles |
Minimum switching current | 5 mA |
Minimum switching voltage | 17 V |
Non-overlap time | 1.5 ms on de-energisation no overlap between NC and NO contact |
1.5 ms on energisation no overlap between NC and NO contact | |
Insulation resistance | > 10 MOhm |
Connections - terminals | Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end |
Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end | |
Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end | |
Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end | |
Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid | |
Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid | |
Screw clamp terminals | |
Tightening torque | 1.7 N.m - with screwdriver flat Ø 6 mm |
1.7 N.m - with screwdriver Philips No 2 | |
1.7 N.m - with screwdriver pozidriv No 2 | |
height | 48 mm |
Width | 44 mm |
Depth | 61 mm |
Colour | Dark grey |
Environment | |
Environmental characteristic | Normal environment |
IP degree of protection | IP20 conforming to IEC 60529 |
Protective treatment | TH conforming to IEC 60068 |
Ambient air temperature for storage | -60…80 °C |
Brand | Schneider Electric |
---|---|
Depth [cm] | 6.1 |
Width [cm] | 4.4 |
Height [cm] | 4.8 |